Vertical advertising machine is a common digital advertising display equipment, usually used in shopping malls, exhibitions, conferences and other occasions. With the continuous update of advertising content, changing the screen of the advertising machine has also become a necessary operation. The following will introduce how to change the screen of the vertical advertising machine.

Step 1: Preparations

Before changing the screen, you need to prepare a new advertising screen. The size and resolution of the advertising screen need to match the screen size and resolution of the advertising players digital signage. At the same time, the advertising screen needs to be saved in a USB flash drive or SD card for use when changing the screen.

Step 2: Turn on the advertising machine

Before changing the screen, you need to turn off the power of the advertising players digital signage and unplug the power cord. Then, use the key to unlock the lock of the advertising machine and open the front panel of the advertising machine.

Step 3: Take Out the Old Screen

After opening the front panel of the advertising digital signage, you can see the screen and picture of the advertising machine. If you need to change the screen, you need to take out the old screen first. Usually, the old picture will be fixed on the screen of the advertising machine, which can be gently removed with fingers or tools.

Step 4: Install the New Screen

After taking out the old picture, the new picture can be installed on the screen of the advertising digital signage supplier. First of all, you need to align the new picture with the screen of the advertising machine, and then press the picture lightly to make it fit the screen. If the picture is not tight enough, you can use tape or other tools to fix it.

Step 5: Turn off the advertising machine

After installing the new screen, it is necessary to close the front panel of the advertising machine and lock the lock of the advertising machine. Then, plug in the power cord, turn on the power of thelcd advertising digital signage, and check whether the new screen is displayed normally.

Summarize:Replacing the screen of a vertical advertising machine is not a complicated operation. You only need to prepare a new screen, open the front panel of the advertising machine, take out the old screen, install a new screen, and then close the advertising machine. When changing the screen, you need to pay attention to the size and resolution of the screen, as well as the fit between the screen and the screen. If the operation is not done properly, the screen may be damaged or the advertising machine may not work properly. Therefore, before changing the screen, it is necessary to carefully read the instruction manual of the advertising machine and follow the operation steps.