With the rise of the emerging intelligent media advertising industry, combined with the Internet information age, the vertical LCD advertising machine has risen rapidly in the domestic market due to its advantages of simple operation and management, low investment cost, powerful functions, and long service life. Any equipment has a specific service life, and the vertical LCD advertising machine is no exception. To reduce equipment failures and prolong service life, correct daily maintenance is very important. Proper operation and maintenance are not only beneficial to the service life of the LCD advertising machine, but also help to save maintenance costs in the later period! So how to use and maintain the vertical liquid advertising machine so that there will be no failure problems and aging? The following is to share with the majority of LCD advertising machine users the maintenance secrets of vertical LCD advertising machines.

1. Attention should be paid to the selection of sockets

The vertical LCD advertising machine has a rated power during operation. If the quality of the selected power socket is not good, the voltage is unstable without a voltage stabilizer, or the voltage is too high or too low to exceed the floating range of the machine, then the chip of the advertising machine will be damaged or stop running. So, please use a relatively high quality power supply, preferably a stand-alone outlet.

2. Attention should be paid to switching on and off

Many electronic products do not pay much attention to switching on and off during normal use. The vertical LCD advertising machine is actually one of the electronic products. Even if the machine itself uses industrial control accessories, if it is not operated carefully, the service life of the machine will be greatly reduced. When it is necessary to force the shutdown, after the forced shutdown, do not turn on the computer immediately, please ensure a three-minute interval! When the machine is running, the chip is working, and the hard disk is reading data. If the power supply is cut off suddenly, it is easy to cause irreparable damage to the hardware.

3. It is recommended to restart regularly

Although the vertical LCD advertising machine can support long-term uninterrupted operation, in order to prolong the life, we can restart the machine at regular intervals. After restarting, the device will automatically clear the cache and reduce CPU consumption, so that the device can run more efficiently. Although the advertising machine supports 7*24 hours of working time, it is recommended not to use it continuously for more than 7*24 hours. In order to ensure the service life of the machine, it is better to be cautious!

4. The location needs to be moisture-proof

The operating environment of the vertical LCD advertising machine should be dry. You must know that electronic products can only be kept dry and avoid working in a humid environment! Because the humid environment is easy to cause the equipment to be damp, and the internal components are easy to rust, which will lead to corrosion of the liquid crystal electrodes, affecting the short circuit of the circuit, the use function and the service life. Therefore, the vertical LCD advertising machine should be placed in a dry space as much as possible, and it should be avoided to operate in the environment of strong light and sunlight. Strong light and sunlight can easily damage the appearance of the machine, aging and damage the casing, seriously causing damage to external components, and affecting the visual effect of the advertising machine screen. If it is not in use for a long time, it must be powered on for a period of time before shutting down. For electronic products, if they are not powered on for a long time and used for a while, they will be aging or unresponsive over time.

When cleaning the dirt on the shell, you must not use strong corrosive liquids, because the shell is made of hardware materials, so as to avoid corrosion of the plating and spray paint on the outside, just wipe it with a wrung wet towel. It is also worth noting that when cleaning the power supply fan, it is necessary to ensure that the machine is turned off. After scrubbing, be sure to wait until it is completely dry before turning it on for use.